Hohm Work V2 18650 Single
Hohm Work V2 18650 Single
Say hello to the successor of the Hohm Work 18650…we proudly introduce the updated Hohm Work2. Phenomenal sustained amperage and voltage delivery under heavy load in a 18650 cell. These are rated by Indonesia Chemistry at 2547mAh capacity, with a CDR of 25.3A, and 80oC | 2.8V cut-off @ 35.8A. For EV and DC motor applications, easily initial power with its 42.4A pulse/peak rating*6. All ratings are subject to meet and/or exceed strict limitation policies set forth for DLr*1, TID*2, PVDL*3, CLR*4 mΩR*5, and Temperature (°C). Hohm Work2 is built with a Cobalt Oxide with proprietary melding of copper, aluminum, ethylene carbonate chemistry concentration, to achieve unprecedented capabilities.
Every Hohm Tech cell model has been tested and certified by UN38.3, EN62133, IEC62133 2nd Edition, and UL1642 accredited laboratories and testing facilities assigned by regulatory bodies. This includes MSDS, CE, ROHS, UN38.3, IEC, Specifications, and Air/Sea Transport certifications. We do not cut corners. We deliver what we promise… chart topping performance, capacity, consistency, and safety.
These cells are built specifically for intense & power-hungry devices that require consistent amperage delivery to operate as intended. Not only was power & capacity a priority, but safety measures were at the forefront of it all.
To expound on safety:
• modified cathode tag consisting of higher purity aluminum (UHP Al) is utilized to aid in lowering internal resistance
• updated poly seal with refined bitumen is installed in every cell to ensure excess pressure is controlled
* NOTICE: Hohm Tech does not manufacture batteries. These are made for and licensed to Hohm Tech Int’l achieving their requirements set forth.
** CAN BE CHARGED AT 3.82A. This is not a misprint. 3.82A as in THREE POINT EIGHT TWO amp charging is possible, tested, proven, and approved within all strict safety protocols set by Indonesia Chemistry.
*** TESTING BEYOND TEMPERATURE. Hohm Tech cells utilize both static & dynamic testing that includes but not limited to: density loss, thermal distribution, volt drop limiters, cycle life retention, internal resistance spread pre|post, and temperature. These tests are imperative to achieve true cell performance, longevity, and overall quality.
1 Density Loss Ratio
2 Thermal Image Distribution
3 Pulse Voltage Drop Limitation
4 Cycle Life Retention
5 Resistance Retentivity Pre/Post
6 Pulse & Peak is applicable to Dynamic EV Systems @ ≤5 SEC ON / ≥30 SEC OFF
Use caution as misusing or mishandling the battery may cause a fire or explosion which may result in personal injury or property damage. The user must have an appropriate understanding of the potential dangers of lithium ion batteries before purchase and usage. No express or implied guarantee of compatibility, suitability, or fitness for any particular purpose or device can be made. This battery is manufactured and sold for the intended use of system integrations with proper protection circuitry or battery packs with a BMS (battery management system) or PCB (circuit board/module). This battery is neither designed nor intended to be used with an e-cigarette, vaporizer, or similar device. Usage of this battery is at your own risk!
Black Edition will not be held responsible or liable for any injury, damage, or defect, permanent or temporary that may be caused by the improper use of a LI-ION battery. Please have a basic understanding of the batteries you are using and how to care for them properly.
Due to the nature of this product, it is not covered by warranty and cannot be exchanged.