SMOK Prince V12 Replacement Coils 3 Pack
SMOK original replacement coils compatible with the TFV12 Prince Tank.
3 coils per pack.
V12-Q4:
- Quadruple coil
- 0.4ohm resistance
- 40-100W range, recommended 60-80W
V12-M4:
- Quadruple coil
- 0.17ohm resistance
- 30-70W range, recommended 45-55W
V12-X2:
- Dual clapton coil
- 0.4ohm resistance
- 40-80W range, recommended 60-70W
V12-X6:
- Sextuple coil
- 0.15ohm resistance
- 50-120W range, recommended 80-100W
V12-T10:
- Decuple coil
- 0.12ohm resistance
- 60-120W range, recommended 80-110W
V12-T10 Light Up Red:
- Decuple coil
- 0.12ohm resistance
- 60-120W range, recommended 80-110W
- Light Up Coil — red glow when firing
V12 Mesh:
- Mesh construction
- 0.15ohm
- 40-80W range, recommended 60-70W
V12 Max Mesh:
- Mesh construction
- 0.17ohm
- 70-130W range, recommended 100-120W
V12 Strip:
- Net construction
- 0.15ohm
- 40-100W range, recommended 60-70W
Warning: Never use a short or flat 510 connection on any hybrid or hybrid style device. If unsure whether this pertains to your particular set-up, DO NOT assemble and use. Always use proper precautions and handling
Warning: These coils are sub-ohm resistance. These coils should only be used by experienced users. Extra safety precautions should be practiced when using a sub ohm tank. These coils will only work on a mechanical mod or a regulated mod capable of firing sub ohm atomizers and coils. For example, if you have a 0.3ohm coil, your mod must be able to fire atomizers of 0.3ohm or lower. You must be also ensure that your batteries can handle sub ohm atomizers and coils. If you're using a regulated mod, make sure it can handle the amps. Improper use can lead to injury or damage. For mechanical mod users, please use 20 Amp batteries or higher. Use the OHMS LAW CALCULATOR, CHECK YOUR AMPS, and be safe! Any questions please contact us by email.
Please Note: This product is not covered by warranty and cannot be exchanged.