Wotofo Mesh Style Coils are perforated Kanthal A1 material. The mesh style coil sheet measures at 16mm by 6.8mm which a resistance of 0.18ohm and performs best at 40 to 60W. This mesh should be dry burned at 15 to 20W.
Mesh Style Coil
- Kanthal A1
- 0.18 ohm
- 16mm by 6.8mm
- 40 to 60W Recommended Range
- 15 to 20W Dry Burn Range
Warning: These coils are sub-ohm resistance. These coils should only be used by experienced users. Extra safety precautions should be practiced when using a sub ohm tank. These coils will only work on a mechanical mod or a regulated mod capable of firing sub ohm atomizers and coils. For example, if you have a 0.3ohm coil, your mod must be able to fire atomizers of 0.3ohm or lower. You must be also ensure that your batteries can handle sub ohm atomizers and coils. If you're using a regulated mod, make sure it can handle the amps. Improper use can lead to injury or damage. For mechanical mod users, please use 20 Amp batteries or higher. Use the OHMS LAW CALCULATOR, CHECK YOUR AMPS, and be safe! Any questions please contact us by email.
Please Note: This product is not covered by warranty and cannot be exchanged.